relay board
relay board
what do you think?
- Attachments
-
- rov relay .png (65.2 KiB) Viewed 3996 times
Last edited by shaneb24 on Jan 5th, 2012, 4:52 pm, edited 1 time in total.
Re: relay board
hi Shane.
that looks like a lot of un-nessesary umbilical wiring. i'd reccomend using a multiplexer of some kind, velleman kit or something similar so you can have a much thinner tether for the same controll. also the cameras need power, or are you supplying this down the coax.
hope this helps and is not just criticism.
that looks like a lot of un-nessesary umbilical wiring. i'd reccomend using a multiplexer of some kind, velleman kit or something similar so you can have a much thinner tether for the same controll. also the cameras need power, or are you supplying this down the coax.
hope this helps and is not just criticism.
Re: relay board
Your absently rite but as of now I'm way over budget and the tether is built already.
Thank you i love the help and criticism.
Thank you i love the help and criticism.
Re: relay board
The LEDs need some sort of current limiting too, at the very least a resistor in each branch, but better still a proper driver circuit. drivers are cheap as chips from china.
Re: relay board
double post. sorry.
Last edited by derelicte on Jan 6th, 2012, 10:04 am, edited 1 time in total.
Re: relay board
well you are only putting 6v across 4 leds, so you don't really need a resistor. what is the forward voltage of each led?
Re: relay board
you can buy already some 6-12V car LED Lights. I bought a chinese product 12V, 18 Leds for about 30$ each (I use 4 of them) saves a lot of soldering and mounting, just plug and play..